#Summit transgo shift kits install#

On the other hand, the new drop-in torque converter regulator valve system does not require any tooling. If you donвЂ™t already have the reamer and guides, you will also need TransGo part # A4A6-RV-TK. i just ordered the transgo shift kit i will get it installed next week i will let you guys know how it works 2012 GT 5.0 automatic JBA H-PIPE, STOCK AXLE BACK, HIGH FLOW Cats, SR Lower control arms, sr springs, Bama V2 Tune,3.55,s, summit 3 inch glass packs in place of resonators,airaid intake tube, 5000k h.i. Piston Pin Bores or outside worn Ask your Distr 4T65-ACM SK-4T65E 10 April 2012 TransGo 2012 4T65E SHIFT KIT Long shifts, hard shifts, chatter with heavy acceleration from stop, no lockup or 4th.

#Summit transgo shift kits install#

In order to install this valve, the bore must first be reamed oversized. will make the shift shorter with comfort. This TransGo SHIFT KITВ® Valve Body Repair Kit includes an oversized USA-made steel reducing valve to completely restore the hydraulic circuit integrity. Consequently, with excessive bore wear, the computer loses the ability to control the lock-up clutch apply rate properly resulting in TCC slip or shudder and TCC related codes. This valve limits the pressure going to the converter when the converter clutch is released and during the apply phase of the lock-up clutch. The other issue has to do with the converter pressure regulator valve bore wear. As a result, shift quality complaints and codes can occur along with low or high main line pressure. If the pressure feeding the solenoids is too high or too low, output will also be too high or too low. This is necessary to prevent more fluid from being fed to the solenoids than they can effectively regulate and to limit what max line pressure output is. The reducing valve spring is calibrated to prevent solenoid feed pressure from exceeding a predetermined PSI, no matter what main line pressure is. The purpose of reducing valve is to limit the pressure going to solenoids, just like an AFL or solenoid regulator valve does on other units. The reducing valve regulates the pressure going to all the solenoids, as well as the lock-up control valve (aka damper clutch control valve) as well as pressure control valves A, B and C.

This transmission uses a reducing valve in the valve body that often severely wear out the valve bore. It may also set gear ratio and solenoid performance codes and have TCC shudder or slip complaints and codes. Please Click on the 'Read More' link for additional details about this item.

Common complaints with this transmission are 2-3 flare, direct clutch failure, erratic shifting, delayed engagements, flares or neutrals during up and downshifts. TransGo Performance 37-1 Shift Kit, Performance, Ford, FMX, 1967-72, Each. The TransGo A4CF SHIFT KITВ® Valve Body Repair Kit fits 2006 and newer Hyundai and Kia vehicles with the A4CF1 and A4CF2 transmission.